There
are a lot of folks trading boot CD-rs these days,
and many are interested in the artwork. There are also many silver disc
collectors interested in scanning and supplying artwork. One problem that
continually crops up is terminology. Different folks use the same word
to refer to various elements of the CD, and some folks
just use the wrong terms. This article will help everyone to get on the
same page.
Here are the terms as they should (and shouldn't)
be used:
©
2002 Craig Pinkerton bobsboots.com
Back We abbreviate this with a small case
'b'. This is the artwork that is visible when the jewel case is viewed
from the non-opening side. Although never referred to as such, for clarification
purposes it is the outside of the tray liner. It usually states the contents
or track listing of the disc. Interchange with Back cover, or (less
desirably) 'rear'. Never refer to it as simply cover or outside.
If you use the less desirable term rear; use inside rear
to refer to the liner, and outside rear to refer to the back.
Don't use the confusing terms of back and front (as in: rear
front or back rear). The back also includes the spines.
©
2002 Craig Pinkerton bobsboots.com
Book or booklet. An insert with multiple
individual pages held together by staples.
©
2002 Craig Pinkerton bobsboots.com
Case See Jewel Case
CD (Compact Disc)
is the proper term used for the entire package,... only when referring
to a glass mastered disc.
©
2002 Craig Pinkerton bobsboots.com
CD is also used to
refer to the silver disc itself. Terms that can be used interchangeably
are cd, CD, Silver CD,
Silver Disc, or Glass Mastered. Never
use any of these terms to refer to a CD-r! Disc
is a generic term that can apply to either a CD or
CD-r.
©
2002 Craig Pinkerton bobsboots.com
CD-r
(CD-recordable) is the proper term for a homemade,
or burnt disc. Interchangeable terms are CDR, burnt
disc, or recorded disc. Never use any of the terms under the CD
heading. 'Disc' is a generic term that can apply to either a CD
or CD-r.
©
2002 Craig Pinkerton bobsboots.com
Disc A generic term that can apply equally
to a CD, CD-r, vinyl LP,
frisbee, part of your spine... etc. etc.
Disk A generic term that applies to medium
that can be written to from a computer. As this includes a CD-r,
some refer to a music CD-r as a disk. That's confusing,
however, and better used when referring to a media containing data only.
©
2002 Craig Pinkerton bobsboots.com
Front We abbreviate this with a small
case 'f'. This should be self explanatory, however, keep in mind that it
only refers to what can be seen when viewing the closed jewel case. Don't
use it to refer to the entire insert. Also, avoid using this term to refer
to any other part of the artwork or insert (such as rear front)
Also
see 'Insert'.
©
2002 Craig Pinkerton bobsboots.com
Glass Master - As opposed to a CD-r that
has been individually created by being directly recorded onto, the traditional
mass produced CD is produced by being replicated from
a single glass disc referred to as the 'master disc' or 'glass master'.
Any CD (such as those purchased at a music store).
At one time, referring to the recording simply as 'CD'
was sufficient. With the advent of the CD-r, some
like to add 'glass master' to clarify that the CD
is a true, replicated, mass produced CD rather than
a CD-r. Other than a few mass produced CD-r
projects, it is only the true glass mastered CD that
holds an intrinsic value with the collector. The term is used interchangeably
to refer to the 'mother' or 'master' disc, the process of replicating,
and/or the finished CD that ends up in the consumer's
hand.
©
2002 Craig Pinkerton bobsboots.com
Insert We abbreviate this with a small
case 'ins.' This is the removable artwork that usually (but not always)
includes the front. Never refer to any part of the insert as the Liner.
It's a common misappropriation to refer to the inside as such. If the insert
is only a single page printed front and back, it should be referred to
as front and insert back. Simply using the term back or
backside will confuse itself with the back cover. The most common configuration
of insert is the two panel. Regardless of the number of panels, the side
of the insert that includes the front is called the Outside. The
opposite side is referred to as the Inside.
©
2002 Craig Pinkerton bobsboots.com
Insert Front We abbreviate this with a
small case 'if.' This term is only to be used if there is a separate insert
in the package that does not include the Front. Don't use this term to
refer simply to the Front. Also see 'Insert'
©
2002 Craig Pinkerton bobsboots.com
Insert Back We abbreviate this with a
small case 'ib.' This is the final page of the insert, or the backside
of a single page insert. Never refer to this as simply Back. Also
see 'Insert'
©
2002 Craig Pinkerton bobsboots.com
Inside We abbreviate this with a small
case 'i'. This refers to the side of a folded insert that is opposite to
the side containing the Front panel Also
see 'Insert'
©
2002 Craig Pinkerton bobsboots.com
Jewel Case is the proper term for the
plastic box that houses the artwork and disc. Interchangeable terms are
case,
and jewel box. Never refer to it as simply box or cover.
©
2002 Craig Pinkerton bobsboots.com
Liner We abbreviate this with a small
case 'l'. The artwork that is visible under the Tray. Never use this term
to refer to an insert, or any part of the insert. Also
see 'Insert'
©
2002 Craig Pinkerton bobsboots.com
Outside This refers to a cardboard gatefold
type of cover, or to the unfolded side of an insert that includes the Front
panel. Never use this term to refer to the back or to the tray
liner. Also see 'Insert'
©
2002 Craig Pinkerton bobsboots.com
Package Item that refers to the total
of the combination of any and/or all of case, artwork, disc, etc.
©
2002 Craig Pinkerton bobsboots.com
Panel Any single section of a folded insert.
It can properly be used to refer to one side, or to both printed sides
together. Therefore, a four panel insert might have only 2 panels per side.
When referred to individually by lettering the panels from left to right
as: a,b,c,d etc.
©
2002 Craig Pinkerton bobsboots.com
Rear a less desirable term for back.
Also
see 'Back'
©
2002 Craig Pinkerton bobsboots.com
Spine This is the title strip viewable
from the side of the jewel case. It is an extension of, and included as
part of the back. In example of the double thick jewel cases, there will
be spines on the front as well.
©
2002 Craig Pinkerton bobsboots.com
Tray This is the (usually) removable part
of the case that holds the disc in place.
©
2002 Craig Pinkerton bobsboots.com
Tray Liner This is the item that is underneath
the tray. The side exposed through the outside of the jewel case is called
the Back. The side that is visible under the tray is referred to
as the Liner. Don't refer to this item as an insert, as it
then confuses with a different item. Some folks refer to it as rear
insert, but this again can be confusing, and should be avoided. In
example of the old style double thick jewel boxes, the front is (in the
strict definition of the word) a tray liner as well... though it is not
referred to as such.
©
2002 Craig Pinkerton bobsboots.com
Tri-fold This is a term for a folded insert
that contains three panels. Interchange with Triptych.
©
2002 Craig Pinkerton bobsboots.com
Triptych This is a term for a folded insert
that contains three panels. Interchange with Tri-fold.
©
2002 Craig Pinkerton bobsboots.com
Return to Top
|